A thin decorative coating, trowelled on by hand, that gives floors, walls and other surfaces a seamless finish. It comes in a wide range of colours and textures to suit almost any interior.
How long does microcement last?
−
Installed and cared for properly, it will last for many years. It stands up well to wear and staining, which makes it a long-term choice for homes and commercial spaces alike.
Is microcement easy to clean and maintain?
−
Yes. Clean it regularly with a pH-neutral cleaner and steer clear of harsh chemicals. Resealing it every so often refreshes the surface and extends its life.
Is microcement environmentally friendly?
−
It uses relatively little material and can usually go straight over existing surfaces, so there is far less demolition and waste. Its long life also means fewer replacements.
How much does microcement cost?
−
It depends on the location, the level of detail and the finish you choose. As a guide, installed microcement typically costs around £130–£170 + VAT per m². [Confirm guide price]
What surfaces can microcement be applied to?
−
Most sound surfaces, including screeds, cement board, tiles, timber, plaster and existing floors or walls — so it suits new builds and renovations alike.
Can microcement be customised in colour and texture?
−
Yes. Our systems come in Large, Mid and Fine Grain: Large Grain gives a durable, natural stone texture for high-traffic floors and walls; Mid Grain gives a softer, understated look with gentle movement; Fine Grain gives the smoothest, most refined finish. Colours can be chosen from our chart or matched to popular paint ranges. [Confirm colour-matching service]
Can microcement be used outdoors?
−
Yes, with the right system it can be used on patios, terraces and external walls for a seamless, weather-resistant finish. [Confirm which Terra systems are suitable outside]
Is microcement compatible with underfloor heating?
−
Yes, it works with most wet and dry underfloor heating systems. Check with your installer first so the substrate is prepared correctly.
Can microcement be repaired?
−
Because it is seamless, large repairs can be hard to blend invisibly, even with the same product and colour. With a good system and proper installation, damage from everyday use is unlikely.
Is microcement waterproof?
−
Once fully sealed, microcement is suitable for wet areas such as bathrooms, wet rooms and kitchens. Always use the complete system — including the waterproofing step and sealer coats — as set out in the product data sheet.
How long does it take to apply microcement?
−
It depends on the size and complexity of the project, but most installations take around 5–7 days including drying and sealing.
How thick is microcement?
−
It goes on in thin layers, usually 2–3 mm in total, so it barely changes floor or wall levels — ideal for renovations.
Does microcement crack?
−
Microcement does not crack by itself; it follows whatever is underneath. Good preparation is key: a solid substrate, a fibreglass mesh layer, running underfloor heating before installation, and movement gaps at doorways and pinch points.
Which Terra system should I choose?
−
Microplaster, Microresin and Claycoat each come in three grains, and Stoneplaster comes in two finishes: dry coat and wet-on-wet. See our Systems pages or talk to us for advice on the right one for your project.